Bezpečnostná kamera HiLook IPC-T651H-Z hlt651, LAN, 2560 x 1920 pix

0
Network Turret Camera Quick Start Guide

Network Turret Camera·Quick Start Guide 1
Quick Start Guide COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.
About this Manual This manual is applicable to T6xx Network Turret Camera.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Network Turret Camera·Quick Start Guide 2
Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network Turret Camera·Quick Start Guide 3
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
EU Conformity Statement

Network Turret Camera·Quick Start Guide 4
This product and – if applicable – the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

Network Turret Camera·Quick Start Guide 5
The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.
Warnings Follow these safeguards to prevent serious injury or death.
Cautions Follow these precautions to prevent potential injury or material damage.

Network Turret Camera·Quick Start Guide 6
● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.
Cautions ● Make sure the power supply voltage is correct before using the camera.
● Do not drop the camera or subject it to physical shock.
● Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, please replace the lens cap to protect the sensor from dirt.
● Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time.
● The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam.

Network Turret Camera·Quick Start Guide 7
● Do not place the camera in extremely hot, cold (the operating temperature shall be -30 °C to 60 °C), dusty or damp locations, and do not expose it to high electromagnetic radiation.
● To avoid heat accumulation, good ventilation is required for operating environment.
● Keep the camera away from liquid while in use.
● While in delivery, the camera shall be packed in its original packing, or packing of the same texture.
● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average enduring time. The average time varies because of differences between operating environment and using history, so regular checking is recommended for all the users. Please contact with your dealer for more details.
● Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
● If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) 0505521080514

Network Turret Camera·Quick Start Guide 8
Table of Contents 1 Appearance Description … 9
2 Installation … 11
(Optional) Install the Memory Card … 11
Ceiling Mounting … 12 Wall Mounting … 16 Mounting with Junction Box… 18
Mounting with Inclined Base … 21 2.6 (Optional) Network Cable Waterproof Jacket Installation23
3 Set the Network Camera over the LAN … 27
Wiring … 27
Activate the Camera … 28 Activation via Web Browser … 28 Activation via SADP Software … 30
Modify the IP Address … 31
4 Access via Web Browser … 34
5 Operate via Hik-Connect App … 36
Enable Hik-Connect Service on Camera … 36 Enable Hik-Connect Service via SADP Software .. 36
Enable Hik-Connect Service via Web Browser … 37 Hik-Connect Setup … 39 Add Camera to Hik-Connect … 39
Initialize the Memory Card … 41

Network Turret Camera·Quick Start Guide 9
1 Appearance Description The overview of the camera is shown as the figure below.
Type I Camera Overview Type II Camera Overview No. Description 1 Camera Body 2 Enclosure 3 Mounting Base 4 Lock Button 1
2
3
4
5
6 2
1
3
45
6

Network Turret Camera·Quick Start Guide 10
No. Description 5 Network Cable 6 Power Cord Notes:  Only certain models support memory card installation and reset function.
 Power on the camera when pressing the RESET button, and press button for another 10 seconds to restore the default settings, including the user name, password, IP address, port No., etc.

Network Turret Camera·Quick Start Guide 11
2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included.
● The standard power supply is 12 VDC, please make sure your power supply matches with your camera.
● Make sure all the related equipment is power-off during the installation.
● Check the specification of the products for the installation environment.
● Make sure that the wall is strong enough to withstand four times the weight of the camera and the bracket.
● Make sure that there is no reflective surface too close to the camera lens. The IR light from the camera may reflect back into the lens causing reflection.
(Optional) Install the Memory Card Only certain models support memory card installation. Here take type II as an example to describe the steps.
Steps: 1. Rotate the camera body to completely expose the memory card slot.

Network Turret Camera·Quick Start Guide 12
Expose the Memory Card Slot 2. Loosen the screws to remove the memory card slot cover.
3. Insert the memory card into the slot, and push to get it mounted.
Install the Memory Card 4. (Optional) To unmount the memory card, push to eject it.
5. Fix the screws to replace the slot cover.
Ceiling Mounting Before you start: Memory Card Slot Reset Button Memory Card

Network Turret Camera·Quick Start Guide 13
Type I and Type II camera both support the ceiling mounting and the steps are similar. Here takes type II as an example to describe the steps.
Steps: 1. Disassemble the camera by pressing the button on the camera.
Disassemble the Camera 2. Paste the supplied drill template to the desired mounting position on the ceiling. Press

Network Turret Camera·Quick Start Guide 14
Figure 2-4 The Drill Template 3. Drill the screw holes or the cable hole in the ceiling according to the drill template.
Note: Drill the cable hole if adopting ceiling outlet to route the cable.
4. Fix the mounting base on the ceiling with supplied screws.
Fix the Mounting Base 14.5
Φ125
14.5
54.3
54.3
39.7
3-Φ4.5

Network Turret Camera·Quick Start Guide 15
Note:  In the supplied screw package, both self-tapping screws, and expansion bolts are contained.
 If the ceiling is cement, expansion bolts are required to fix the camera. If the ceiling is wooden, self-tapping screws are required.
5. Route the cables through the cable hole, or the side opening.
6. Install the camera body back to the mounting base.
Install the Camera Body 7. Connect the power cord and network cable.

Network Turret Camera·Quick Start Guide 16
8. Power on the camera, and set the network configuration. For details, refer to 3 Set the Network Camera over the LAN and 4 Access via Web Browser.
9. Adjust the surveillance angle.
Adjust Surveillance Angle 1). Hold the camera body and rotate the enclosure to adjust the pan angle [0° to 360°].
2). Move the camera body up and down to adjust the tilt angle [0° to 75°].
3). Rotate the camera body to adjust the rotation angle [0° to 360°].
Wall Mounting Before you start: ● Type I and Type II both support wall mounting and the steps are similar. Here takes type II as an example to describe the steps.
● You need to purchase a wall mounting bracket separately. Rotation: 0 to 360° Pan: 0 to 360° Tilt: 0 to 75°

Network Turret Camera·Quick Start Guide 17
Steps: 1. Disassemble the camera by pressing the button on the camera.
Disassemble the Camera 2. Drill screw holes in the wall according to the holes of the bracket and install the bracket to the wall with screws.
Install the Bracket 3. Install the mounting base to the bracket with screws. Press

Network Turret Camera·Quick Start Guide 18
Install the Mounting Base to the Bracket 4. Repeat steps 5 to 9 of 2.2 Ceiling Mounting to complete the installation.
Mounting with Junction Box Before you start: ● Type I and Type II both support mounting with junction box and the steps are similar. Here takes type II as an example to describe the steps.
● You need to purchase a junction box separately.
Steps: 1. Disassemble the camera by pressing the button on the camera.

Network Turret Camera·Quick Start Guide 19
Disassemble the Camera 2. Paste the supplied drill template to the desired mounting position.
Drill Template 3. Drill the screw holes according to the drill template.
4. (Optional) If you want to route the cables inside the wall, drill a cable hole in the wall according to the adapter plate.
5. Take apart the junction box, and fix the camera mounting base on the junction box’s cover with screws. Press 62.6
62.6
4-Φ6
Φ130
Φ30

Network Turret Camera·Quick Start Guide 20
Fix Mounting Base on the junction box’s Cover 6. Secure the junction box’s body on the wall with screws.
Secure the Junction Box’s Body on the Wall 7. Combine the junction box’s cover with its body with supplied screws. Junction Box Cover Mounting Base Junction Box Body

Network Turret Camera·Quick Start Guide 21
Combine the Junction Box’s Cover with its body 8. Repeat steps 5 to 9 of 2.2 Ceiling Mounting to complete the installation.
Mounting with Inclined Base Before you start: ● Type I and Type II both support mounting with inclined base and the steps are similar. Here takes type II as an example to describe the steps.
● You need to purchase an inclined base separately.
Steps: 1. Disassemble the camera by pressing the button on the camera.
Disassemble the Camera Press

Network Turret Camera·Quick Start Guide 22
2. Paste the inclined base’s drill template to the wall.
3. Drill screw holes and the cable hole (optional) on the wall according to the supplied drill template.
Note: Drill the cable hole, when adopting ceiling outlet to route the cable Drill Template 4. Disassemble the inclined base and install the camera’s mounting base on the inclined base cover with screws.
Fix Camera’s Mounting Base 5. Install the inclined base’s body on the wall with screws. 62.6
62.6
4-Φ6
Φ130
Φ30 Inclined Base Cover Mounting Base

Network Turret Camera·Quick Start Guide 23
Fix the Inclined Base’s boy on Ceiling/Wall 6. Combine inclined base’s cover with its body with screws.
Combine the Cover with the Body 7. Repeat steps 5 to 9 of 2.2 Ceiling Mounting to complete the installation.
2.6 (Optional) Network Cable Waterproof Jacket Installation Purpose: If the camera is installed outdoor, you can use the waterproof accessory for the network cable after the camera is secured on the installation surface. Inclined Base Body

Network Turret Camera·Quick Start Guide 24
Figure 2-21 Waterproof Accessory Components Table 2-1 Components No. Components 1 Camera’s Network Interface Socket 2 O-Type Gasket 3 Network Plug 4 Waterproof Endcap 5 Waterproof Rubber Gasket 6 Lock Nut 7 Network Cable from Router/Switch Steps: Feed the plugless network cable ⑦ through the lock nut ⑥, waterproof the rubber gasket ⑤ (rubber gasket inset ridge must face waterproof endcap), and the waterproof endcap ④ in order. ① ②③④⑤⑥⑦

Network Turret Camera·Quick Start Guide 25
Crimp an RJ-45 network plug ③onto the end of the cable, taking care to insert the twisted pairs of wires in correct order. Place the O-type gasket ② onto the end of the camera’s network interface socket ①. Insert the network plug ③ into the camera’s network interface socket ①.
Insert the waterproof rubber gasket ⑤ into the waterproof endcap ④, and secure lock nut ⑥ with the waterproof endcap ④.
Align the snap on the waterproof endcap ④ with the notch on the camera’s network interface socket ①, and then secure the waterproof endcap ④ to the camera’s network interface socket ① to finish installation.

Network Turret Camera·Quick Start Guide 26
Waterproof Accessory Installation Camera Switch/Router Align the snap and notch.
i. Insert ⑤ into ④.ii. Secure ⑥ with ④.

Network Turret Camera·Quick Start Guide 27
3 Set the Network Camera over the LAN
Note: You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.
If the product does not work properly, contact your dealer or the nearest service center for help.
Wiring Connect the camera to network according to the following figures.
Connect Directly Connect via a Switch or a Router Network Cable or Network Camera Computer 半球 Network Cable Network Cable or or Network Camera Computer 网络交换机 半球

Network Turret Camera·Quick Start Guide 28
Activate the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera.
Activation via web browser, activation via SADP, and activation via client software are all supported. We will take activation via SADP
software and activation via web browser as examples to introduce the camera activation.
Note: Refer to the User Manual of Network Camera for activation via client software.
Activation via Web Browser Steps: 1. Power on the camera. Connect the camera to your computer or the switch/router which your computer connects to.
2. Input the IP address into the address bar of the web browser, and press Enter to enter the activation interface.
Notes:  The default IP address of the camera is 192.168.1.64.
 The computer and the camera should belong to the same subnet.
 For the camera enables the DHCP by default, you need to use the SADP software to search the IP address.

Network Turret Camera·Quick Start Guide 29
Activation Interface (Web) 3. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
4. Confirm the password.

Network Turret Camera·Quick Start Guide 30
5. Click OK to save the password and enter the live view interface.
Activation via SADP Software SADP software is used for detecting the online device, activating the camera, and resetting the password.
Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts.
Follow the steps to activate the camera.
Steps: 1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the inactive device.
SADP Interface Note: The SADP software supports activating the camera in batch. Refer to the user manual of SADP software for details. Select inactive device.
Input and confirm password.

Network Turret Camera·Quick Start Guide 31
3. Create and input the new password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
Note: You can enable the Hik-Connect service for the device during activation. Refer to Chapter 5.1 for detailed information.
4. Click Activate to start activation.
You can check whether the activation is completed on the popup window. If activation failed, make sure that the password meets the requirement and try again.
Modify the IP Address Purpose: To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the same subnet with your PC.
Use the SADP software or client software to search and change the IP address of the device. We take modifying the IP Address via SADP software as an example to introduce the IP address modification.

Network Turret Camera·Quick Start Guide 32
For IP address modification via client software, refer to the user manual of client software.
Steps: 1. Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking the checkbox of Enable DHCP.
Modify the IP Address

Network Turret Camera·Quick Start Guide 33
Note: You can enable the Hik-Connect service for the device during activation. Refer to Chapter 5.1 for detailed information.
4. Input the admin password and click Modify to activate your IP address modification.
The batch IP address modification is supported by the SADP. Refer to the user manual of SADP for details.

Network Turret Camera·Quick Start Guide 34
4 Access via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version CPU: 2.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2 and above version, Mozilla Firefox 5.0 and above version and Google Chrome 18 and above version Steps: 1. Open the web browser.
2. In the browser address bar, input the IP address of the network camera, and press the Enter key to enter the login interface.
Note: The default IP address is 192.168.1.64. You are recommended to change the IP address to the same subnet with your computer.
3. Input the user name and password.
The admin user should configure the device accounts and user/operator permissions properly. Delete the unnecessary accounts and user/operator permissions.
Note: The device IP address gets locked if the admin user performs 7
failed password attempts (5 attempts for the user/operator).

Network Turret Camera·Quick Start Guide 35
4. Click Login.
Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Follow the installation prompts to install the plug-in.
Note: You may have to close the web browser to finish the installation of the plug-in.
Download Plug-in 6. Reopen the web browser after the installation of the plug-in and repeat steps 2 to 4 to login.
Note: For detailed instructions of further configuration, please refer to the user manual of network camera.

Network Turret Camera·Quick Start Guide 36
5 Operate via Hik-Connect App Purpose: Hik-Connect is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification and so on.
Note: Hik-Connect service is not supported by certain camera models.
Enable Hik-Connect Service on Camera Purpose: Hik-Connect service should be enabled on your camera before using the service.
You can enable the service through SADP software or web browser.
Enable Hik-Connect Service via SADP Software Steps: 1. Check the checkbox of Enable Hik-Connect on: 1). "Activate the Device" page during camera activation, refer to Chapter 3.2.2.
2). Or "Modify Network Parameters" page during modifying IP address, refer to Chapter 3.3.
2. Create a verification code or change the verification code.

Network Turret Camera·Quick Start Guide 37
Verification Code Setting (SADP) Note: The verification code is required when you add the camera to Hik-Connect app.
3. Click and read "Terms of Service" and "Privacy Policy".
4. Confirm the settings.
Enable Hik-Connect Service via Web Browser Before you start: You need to activate the camera before enabling the service. Refer to Chapter 3.2.

Network Turret Camera·Quick Start Guide 38
Steps: 1. Access the camera via web browser. Refer to Chapter 4.
2. Enter platform access configuration interface: Configuration > Network > Advanced Settings > Platform Access.
Platform Access Configuration (Web) 3. Select Platform Access Mode as Hik-Connect.
4. Check the checkbox of Enable.
5. Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
6. Create a verification code or change the verification code for the camera.
Note: The verification code is required when you add the camera to Hik-Connect app.

Network Turret Camera·Quick Start Guide 39
7. Save the settings.
Hik-Connect Setup Steps: 1. Download and install the Hik-Connect app by searching “Hik-Connect” in App Store or Google PlayTM.
2. Launch the app and register for a Hik-Connect user account.
3. Log in Hik-Connect app after registration.
Add Camera to Hik-Connect Before you start: You need to enable the Hik-Connect service on camera before adding it to your Hik-Connect account. Refer to Chapter 5.1.
Steps: 1. Use a network cable to connect the camera with a router if the camera does not support Wi-Fi.
Connect a Router Note: After the camera connects to the network, please wait one minute before any operation on the camera using Hik-Connect app.

Network Turret Camera·Quick Start Guide 40
2. In the Hik-Connect app, tap “+” on the upper-right corner and then scan the QR code of the camera to add the camera.
You can find the QR code on the camera or on the cover of the Quick Start Guide of the camera in the package.
Scan QR Code Note: If the QR code is missing or too blur to be recognized, you can also add the camera by tapping the icon and inputting the camera's serial number.
3. Input the verification code of your camera.
Note: ● The required verification code is the code you create or change when you enabling Hik-Connect service on camera.
● If you forget the verification code, you can check the current verification code on Platform Access configuration page via web browser.
4. Follow the prompts to set the network connection and add the camera to your Hik-Connect account.
Note: For detailed information, refer to the user manual of the Hik-Connect app.

Network Turret Camera·Quick Start Guide 41
Initialize the Memory Card Steps: Check the memory card status by tapping on the Storage Status in the Device Settings interface.
If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal. You can then start recording any event triggered video in the camera such as motion detection.

0
UD10150B