Sieťový IP videorekordér (NVR) pre bezp. kamery HiLook NVR-216MH-C/16 hl216p, 16-kanálový

Digital/Network Video Recorder Quick Start Guide

Digital Video Recorder Quick Start Guide 1
Quick Start Guide COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Digital Video Recorder Quick Start Guide 2
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and – if applicable – the supplied accessories too are marked with „CE“ and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Digital Video Recorder Quick Start Guide 3
Symbol Conventions The symbols that may be found in this document are defined as follows.
Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.  Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC, 12 VDC or 48 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.  Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.  Please make sure that the plug is firmly connected to the power socket.  If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the following tips:  Ensure unit is installed in a well-ventilated, dust-free environment.  Unit is designed for indoor use only.  Keep all liquids away from the device.  Ensure environmental conditions meet factory specifications.  Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit.  Use the device in conjunction with an UPS if possible.  Power down the unit before connecting and disconnecting accessories and peripherals.  A factory recommended HDD should be used for this device.  Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
Symbol Description Provides additional information to emphasize or supplement important points of the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Digital Video Recorder Quick Start Guide 4
Chapter 1 Rear Panel Interfaces Description The rear panel interfaces vary with different models. Refer to Table 1-1 for the common interfaces description of rear panels. Table 1-1 Common Interfaces Description of Rear Panels Item Description Item Description VIDEO IN BNC interface for Turbo HD and analog video input VIDEO OUT BNC connector for video output AUDIO IN RCA connector AUDIO OUT RCA connector LINE IN Connector for two-way audio input USB Interface Universal Serial Bus (USB) port for additional devices VGA DB15 connector for VGA output. Displays local video output and menu. HDMI HDMI video output connector RS-485 Interface Connector for RS-485 devices RS-232 Interface Connector for RS-232 devices LAN Connector for network eSATA Storage and expansion interface for record or backup ALARM IN/OUT Connector for alarm input/output GND Ground Power Switch Switch for turning on/off the device Power Supply 100 to 240 VAC, 48 VDC, or 12 VDC for different models

Digital Video Recorder Quick Start Guide 5
Chapter 2 Installation and Connections 2.1 Installation During installation of the DVR/NVR:  Use brackets for rack mounting.  Ensure ample room for audio and video cables.  When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.  Connect the alarm cable.  Allow at least 2 cm (≈0.75-inch) of space between racks mounted devices.  Ensure the DVR/NVR is grounded.  Environmental temperature should be within the range of -10 to +55ľ C, +14 to +131ľ F.  Environmental humidity should be within the range of 10% to 90%.

Digital Video Recorder Quick Start Guide 6
Chapter 3 Menu Operation 3.1 Startup Proper startup is crucial to expanding the life of the DVR/NVR. Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power button on the front panel should be red, indicating the device is receiving the power. Step 2 Press the POWER button on the front panel. The Power LED should turn blue. The unit will begin to start.
3.2 Activating Your Device Purpose For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. You can also activate the device via Web Browser, SADP or client software. Step 1 Enter the same password in the text fields of Create New Password and Confirm New Password. Step 2 Click OK to save the password and activate the device.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
Figure 3-1 Set Admin Password Clear-text password is supported. Click and you can see the clear text of the password. Click the icon again and the content of the password restores invisible (the same below).

Digital Video Recorder Quick Start Guide 7
3.3 Using the Unlock Pattern for Login Purpose For the Admin user, you can configure the unlock pattern for device login. After the device is activated, you can configure the device unlock pattern. Step 1 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done.
 Connect at least 4 dots to draw the pattern.  Each dot can be connected for once only. Step 2 Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully. Step 3 You can use the configured unlock pattern for future login.
Figure 3-2 Draw the Pattern 3.4 User Login Purpose If DVR/NVR has logged out, you must log in to the device before operating the menu and other functions. Step 1 Select the User Name in the drop-down list. Step 2 Enter the Password. Step 3 Click OK to log in.
For the admin, if you have entered the wrong password for 7 times, the account will be locked for 60 seconds. For the operator, if you have entered the wrong password for 5 times, the account will be locked for 60 seconds. Figure 3-3 Login

Digital Video Recorder Quick Start Guide 8
3.5 User Logout, Shutdown and Reboot Purpose You can log out of the system, shut down, or reboot the device on your demands. Step 1 Go to Menu > Shutdown. Step 2 Click Logout, Shutdown, or Reboot.
After you have logged out of the system, menu operation on the screen is invalid. It is required to enter a user name and password to unlock the system. Figure 3-4 Logout 3.6 Viewing Signal Input Status(DVR) Purpose The analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be recognized and connected automatically. For some series of DVR, you can configure 5 MP long distance transmission on the Signal Input Status interface. For other models, there is no Signal Input Status interface.
The following steps are about 5 MP long distance transmission configuration for the supported DVR. Step 1 Go to Menu > Camera > Signal Input Status.
Figure 3-5 Signal Input Status Step 2 Click to enter the 5 MP Long Distance Transmission Settings interface. Step 3 Check the channel(s) to enable 5 MP long distance transmission. Step 4 Click Apply to save the settings and OK to return to the Signal Input Status interface.
Figure 3-6 5 MP Long Distance Transmission Settings

Digital Video Recorder Quick Start Guide 9
3.7 Adding IP Cameras(NVR) Purpose Before you can get live video or record the video files, you should add the network cameras to the connection list of the device. Before you start Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please refer to the User Manual for activating the inactive IP camera. Step 1 Go to Menu > Camera > IP Camera. Step 2 Select the IP camera from the list and click to add the camera (with the same admin password of the NVR’s). Step 3 (Optional) Check Enable H.265 (For Initial Access) for the connected IP camera supporting H.265. Then the IP camera will be encoded with H.265.
Figure 3-7 Add IP Camera 3.8 Network Settings 3.8.1 Configuring General Settings Purpose Network settings must be properly configured before you operate DVR/NVR over network. Step 1 Go to Menu > Configuration > Network > General. Step 2 Configure the general parameters of network. Step 3 Click Apply to save the settings.
Figure 3-8 Network Settings 3.8.2 Configuring HiLookVision Purpose HiLookVision provides the mobile phone application and the service platform page to access and manage your connected DVR/NVR, which enables you to get a convenient remote access to the surveillance system.

Digital Video Recorder Quick Start Guide 10
The HiLookVision can be enabled via operation on SADP software, GUI and Web browser. We introduce the operation steps on GUI in this section. Step 1 Go to Menu > Configuration > Network > Platform Access.
Figure 3-9 HiLookVision Settings Step 2 Check the Enable checkbox to activate the function. Then the Service Terms interface pops up. 1) Enter the code in Verification Code. 2) Check The HiLookVision service will require internet access. Please read Service Terms and Privacy Statement before enabling the service if you agree the service terms and privacy statement. 3) Scan the QR code on the interface to read the Service Terms and the Privacy Statement. 4) Click OK to save the settings. Figure 3-10 Service Terms  HiLookVision is disabled by default.  The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is case sensitive. Step 3 (Optional) Check Custom and enter the Server Address. Step 4 (Optional) Check Enable Stream Encryption. After this feature is enabled, the verification code is required for remote access and live view.
You can use the scanning tool on your smartphone to download the smartphone app or add the device by scanning the QR code. Figure 3-11 HiLookVision Settings Step 5 Click Apply to save the settings.
Please refer to the help file on the official website and the HiLookVision Mobile Client User Manual for adding the device to HiLookVision and more operation instructions.
3.9 Live View Icons are provided on screen in Live View mode to indicate camera status. These icons include: Live View Icons

Digital Video Recorder Quick Start Guide 11
In the live view mode, there are icons at the upper-right corner of the screen for each channel, showing the status of the record and alarm in the channel for quick reference.
Alarm (video loss, tampering, motion detection, VCA or sensor alarm) Record (manual record, continuous record, motion detection, VCA or alarm triggered record) Alarm and Record Event/Exception (event and exception information, appears at the lower-left corner of the screen.) 3.10 Recording Settings Before you start Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to the user manual for detailed information. Purpose Two kinds of record types are introduced in the following section, including Instant Record and All-Day Record. And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled. Step 1 Click Start Recording from the right-click menu. Step 2 Select Continuous Record or Motion Detection Record on your demand. Step 3 Click Yes in the pop-up box to confirm the settings. Figure 3-12 Start Recording from Right-Click Menu

Digital Video Recorder Quick Start Guide 12
3.11 Playback Purpose The recorded video files and pictures on the hard disk can be played back in the following modes: instant playback, all-day playback for the specified channel, and playback by normal/event/smart/tag/system logs/sub-periods/external file search/picture. Step 1 Go to Menu > Playback. Step 2 Check the channel(s) in the channel list for playback. Step 3 Double click a date on the calendar. Step 4 (Optional) Use the toolbar in the bottom part of Playback interface to control the playing progress. Step 5 (Optional) Select the channel(s) to execute simultaneous playback of multiple channels. Figure 3-13 Playback

Digital Video Recorder Quick Start Guide 13
Chapter 4 Accessing by Web Browser You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, please contact with your dealer or the nearest service center. Purpose You can get access to the device via web browser. You may use one of the following listed web browsers: Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Ex plorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024*768 and above. Step 1 Open web browser, enter the IP address of the device and then press Enter. Step 2 Log in to the device.  If the device has not been activated, you need to activate the device first by setting the password for the admin user account.  If the device is already activated, enter the user name and password in the login interface, and click Login. Step 3 Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in.
 You may have to close the web browser to finish the installation of the plug-in.  After login, you can perform the operation and configuration of the device, including the live view, playback, log search, configuration, etc.
Figure 4-1 Activate the Device Figure 4-2 Login

Digital Video Recorder Quick Start Guide 14
Use only power supplies listed in the user instructions. Adapter: NVR-104-B/4P, NVR-104-B/4P/M,NVR-104-B, NVR-104-B/M, NVR-108-B, NVR-108-B/M, NVR-108-B/8P, NVR-108-B/8P/M  MSA-C1500IC12.0-18P-D, MSP-Z1360IC48.0-65W , MOSO Adapter: NVR-104MH-C/4P  MSP-Z1360IC48.0-65W , MOSO Adapter: NVR-108MH-C/8P  2AAL090R , CHANNEL WELL TECHNOLOGY CO.,LTD.
Adapter: NVR-104MH-C, NVR-108MH-C, NVR-116MH-C
EU：  MSA-C1500IC12.0-18P-DE , MOSO  ADS-25FSG-1212018GPG,HONOR  ADS-26FSG-12 12018EPG, HONOR  KL-AD3060VA,KL
US：  MSA-C1500IC12.0-18P-US , MOSO  TS-A018-120015AD,Shenzhen Transin Technologies Co.,Ltd  KL-AD3060VA, KL  ADS-26FSG-12 12018EPCU, HONOR
KOR：  KPC-024F , CHANNEL WELL TECHNOLOGY CO.,LTD.
0305201080703

Digital Video Recorder Quick Start Guide 15
UD10852B